24V 5M Reel RGB color changing LED Strip Light, the brightest 5050 LED Tape.

Introduction

This 24V RGB LED strip light is equipped with 300 LEDs on a 5m reel flexible printed circuit board(FPCB). High brightness 5050 color changing LEDs are used to create the also called brightest 5050 LED tape light. It is not only brighter than the light strip with 150 LEDs, but also brighter than many other brand RGB LED tape lights with 300 LEDs.

RGB LED strip REQUIRES an RGB LED controller to work. It can produce almost any color you like, stay in one color, red, green, blue, purple, orange, pink, and many more. With these colors, it also creates many color changing modes, flash, fading, strobe, etc. It is perfect for places that desires multiple color changing effects.

Depending on the RGB LED controller, you can synchronize music on your smart phone with lighting. The color changing lighting can also change with sound input. The synchronization creates a dynamic multi color changing atmosphere. With WiFi RGB LED controller, the light strip can also be integrated with Amazon Alexa or Google Assistant, compatible with smart home lighting control.

This 5050 LED tape light comes with strong 3M double sided tape for easy installation. You can also select an LED aluminum profile for better heat dissipation. At the same time, the aluminum profile cover works as a diffuser, which can provide better light diffusion for LED strips.

12V or 24V RGB LED strip?

The voltage selection depends on your project. Basically the difference lies in that 24V LED strips easily can be installed for longer run than the 12V strips. It is caused by the voltage drop that exists for any LED strip light. If you want to install for large scale, we recommend you choose the 24V strips. But be aware that 12V strips can have a wider range of use than 24V, because many places only provide 12V power, such as cars, RVs, boats, yachts etc. Another factor is that most 12V LED strips have shorter cutting increments than 24V strips. This means 12V strips can be installed in preciser length than 24V version.

Recommended Reading： The difference between 12V and 24V LED strips.

Note: for either 12V or 24V RGB LED strip, an RGB LED controller is required.

Product features.

• High brightness big chip 5050 LEDs used, brighter than many other brands.
• 24VDC, fully dimmable to any brightness.
• Wavelength: 635/520/466 nm.
• Lumens: 119/318/82 lumens/meter.
• Have many color changing effects, flash, strobe, fading, etc.
• Can stay in one single color, such as red, green, blue, pink, purple, and many other colors.
• Depends on the RGB controller, you may DIY your own color changing sequence, timing, and more effects.
• Beam Angle 120°
• 60 LEDs/m (18 LEDs/ft), 300 LEDs per reel.
• 52 Watts
• 10.4 Watts/m = 3.17 Watts/ft
• Strip width 0.39"(10mm)
• IP20, Non-Waterproof.
• UL listed.

See related parts lower on this page or their respective categories for Power Supplies, LED Controllers, LED Strip Connectors, LED Aluminum Channels, and more accessories that we have selected for this LED strip.