2.4G RF Wireless RGB LED Controller Kit for LED Strip Lights

This performance RGB controller kit is very popularly used to take control of the color management of the 12V or 24V, 5050 RGB multi color LED strip lights. Select color or color changing modes, adjust brightness, change speed, turn on and off the lights, etc.

The 2.4G wireless RGB controller kit is ready for installation, items included:

• An RF RGB Remote Control with touch color-wheel and control buttons.
• An RF Wireless Receiver(also WiFi compatible), 6 Amps/CH, 10Amps total max output.

The remote control is designed with a sensitive touch wheel by which you can select any color you like. Control buttons allow you to easily turn on and off the lights, adjust the brightness level, switch the color changing modes, change the mode speed, etc. There are as many as 20 color changing modes pre-stored.

The RGB controller has power off memory function. When powered on next time, it will resume the previous setting, such as the color and brightness level, or the color changing mode.

It comes in a kit that includes one remote and one receiver. Users can re-program and pair multiple remotes and receivers. One remote can control an unlimited number of receivers. One receiver can be controlled by four remotes at most.

To get the optimal performance, please keep your fingers off the color-wheel when installing batteries. If find that the touch color-wheel is low in sensitivity, please change the batteries. To improve the sensitivity, please wait 3 seconds after the batteries are installed to use the remote.

The RF wireless controller has a control distance of 30 meters (100ft). The 2.4GHz signal does not need line of sight between remote and receiver. The control signal can go through barrier and walls.

The controller is WiFi compatible. Adding a compatible 2.4G WiFi Gateway Transmitter, the controller receiver can work as a WiFi RGB controller, which can be controlled by your smart phone or tablet via WiFi or 4G network, using an application software installed on Apple IOS or Android smart phones or other devices. This means you can control your lighting using 4G smart phone at any time and anywhere.

The WiFi Gateway supports third party smart lighting control, such as voice control via Amazon Alexa or Google Assistant. The WiFi gateway also enables two-way data communication, letting you know the light status at any time.

Product Features:

• 2.4G wireless RGB touch remote control, with color wheel and buttons.
• Control range is 100 ft (30 meters), from the remote to receiver.
• RF wireless signal goes through walls, no line of sight needed.
• WiFi compatible. Add a WiFi gateway, can be controlled using smart phone via WiFi or 4G network. This means you can use your 4G smart phone to control the lighting any time and anywhere.
• Controller Receiver Input Voltage: 12 or 24 DC.
• Two methods to power the controller receiver: DC female barrel connector or use two screw terminals for hard wire connection.
• Controller Receiver Output Voltage: 12 or 24 DC.
• Controller Receiver Output Amp: 6A per channel, total 10A max.
• Controller Receiver Output Power (Watts): 120W or 240W

Note: the remote operates on 2 x AAA batteries. Batteries are NOT included.

For more choices on RGB controllers, please see RGB LED controller series.